ELECTROMECHANICAL, DATE INDICATOR AND DIGITAL
Franklin France proposes 3 types of counters :
The impact controller or lightning counter is designed for detecting and counting lightning strikes received by the structures equipped with lightning conductors. It is installed in general on a down conductor.
Installation, instructions and maintenance
1. This product can be installed in the load current power line (L, N line) above 500 A to monitor and record the surge voltage in the power line. It can also be installed in various surge protectors (SPD).
Online, monitor and record lightning strike (SPD) for lightning strikes.
2. the line that needs to be monitored must pass through th eback of the counter, no direction limited.
3.there is a RST clear button on the counter panel to clear the data as needed.
4.this product does not need to be debugged. It is in working state after general access. When the counter is not displayed (3-5 years later) the counter of the same specification can be replaced.
Installation
NFC 17-102 : installation at approximately 2 m from its base. Mounting in serial on the down conductor, on a compulsory path of the lightning current.
Meshed cages : installation recommended of a counter on each frontage, on the down conductors connecting to the highest points of the structure.