Conductors fixings
Down conductor fixings
The number of fixings per meter varies depending on the standards :
• According to NF C 17-102, each conductor must be fixed with 3 fasteners per meter (every 33 cm).
• According to NF EN 62 305-3, the number of fixings per meter may vary according to Table E1 of the standard: every 50 or 100 cm.
NF C 17-102 : 3 fixings per linear meter.
Clamps AFH2030CM
Used to fix flat conductors onto concrete or brick masonry walls; to be used with plastic anchors AFH2030CC.
View datasheet
Stainless steel clips AFH6050CL
Stainless steel clips allow strip conductors to be fixed onto all types of surfaces using watertight Ø4 mm pop rivets (AFH0075RP), expansion anchors (AFH8050CE), Ø3.9 mm self-drilling screws, spit anchors, or Ø4 mm max screws.
Plastic fasteners AFH6414AC
Designed for fixing down conductors on all types of materials. Other models are available in our catalogue.
View datasheet
Downloadable technical data sheet(s):
Discover also :
Protection systems
Active 1D+ Early streamer emission
Protection systems
ACTIVE 2D® Early streamer emission
Protection systems
ACTIVE 4D® Early streamer emission
Lightning counters and remote testers
ACTIVE 1D® Wire Test
Lightning counters and remote testers
Active 1D® and Active 2D® Perch test
Lightning counters and remote testers
ACTIVE 2D® Remote Tester
Lightning counters and remote testers
ACTIVE 2D® Multitester pack
Protection systems
Franklin type simple lightning rods
Masts supports and fixings
Lightning rods fixings
Lightning counters and remote testers
Lightning counters
Conductors fixings
Conductor fixings on flat roofs
Protection systems
Meshed cage
Protection systems
Tight Strand
Earthing system
Grounding
Earthing system
Exothermic welding
Earthing system
Ground Improving Material
Earthing system