Lightning counters and remote testers

ACTIVE 2D® Remote Tester

The Active 2D® lightning conductor can be tested on site, with its AFV0101TT remote tester (initial checking, periodical checkings according to NFC 17-102 standard of september 2011 and decrees in force, maintenance,…..).

Simple and fast, this test does not need any particular operation of dismantling of the lightning rod and can be done safely from the ground. The testers use the communication with non disturbing radio waves. The lightning rods and their testers are both equipped with a transceiver : bidirectionnal emission and reception.

The LED display indicates instantaneously the obtained result (positive or negative).
The performed tests on the lightning rod with the remote tester are numerous : tests at the terminals of the capacitor, voltage test at the terminals of the battery, test of the electrical continuity, test of the communication.

The Active 2D® can be also tested with a telescopic perch AFV0087PT and its tester AFV0050TT.

 

Share this page on :

Discover also :

Protection systems

Meshed cage

Protection systems

Tight Strand

Lightning counters and remote testers

ACTIVE 2D® Multitester pack

Lightning counters and remote testers

ACTIVE 1D® Wire Test

Lightning counters and remote testers

Active 1D® and Active 2D® Perch test

Earthing system

Grounding

Lightning counters and remote testers

Lightning counters

Earthing system

Exothermic welding

Earthing system

Ground tester