Lightning counters and remote testers
Active 1D® and Active 2D® Perch test
This AFV0087PT telescopic perch associated to AFV0050TT wire test box allows to check the good functionning of Active 1D® and Active 2D® on site (initial check, periodical checks according to NF C 17-102 standard of september 2011 and decrees in force, maintenance,…).
This telescopic perch associated to AFV0050T wired test case, allows to check the correct operating condition of the Active1D® and Active 2D® lightning conductors on site (initial checking, periodical checking according to NF C 17–102 standard of september 2011 and decrees in force, maintenance,…).
Simple and fast, this test can be done from accessible and secured roofs without disassembling the lightning conductor until a height of 8 meters.
The upper hook of the perch should be positioned at the bottom of the lightning rod’s point. It is connected to two clamps of AFV0050TT tester.
The second clamp is connected to the lightning rod down conductor situated at the elevation rod bottom.
Discover also :
Protection systems
ACTIVE 1D® Early streamer emission
Protection systems
ACTIVE 2D® Early streamer emission
Protection systems
ACTIVE 4D® Early streamer emission
Lightning counters and remote testers
ACTIVE 1D® Wire Test
Lightning counters and remote testers
ACTIVE 2D® Remote Tester
Lightning counters and remote testers
ACTIVE 2D® Multitester pack
Protection systems
Franklin type simple lightning rods
Masts supports and fixings
Lightning rods fixings
Protection systems
Meshed cage
Lightning counters and remote testers
Lightning counters
Protection systems
Tight Strand
Earthing system
Grounding
Earthing system
Exothermic welding
Earthing system
Ground Improving Material
Earthing system