Earthing system
Exothermic welding
The solutions of ARGOSWELD ® exothermic welding, from ARGOS®range, will allow you to connect different types of conductors between each other in a sure, reliable, simple and fast way (tape, round, earth rod, rebar, stainless steel).
Allows to weld the conductors all together in order to obtain a perfect continuity. The principle consists in putting in a mould the weld powder and the ignition powder.
The composition of the weld powder depends on the metals to weld (copper oxide and aluminum for a welding (copper/copper).
The reduction of copper oxide by aluminum produces under very high temperature, melted copper and slag of aluminum oxide.
This bath of copper in fusion is canalized by the mould on the parts to weld, melt it and link it molecularly between each other.
This system does not need any external power supply. Delivered with suitcase, file, brush, gloves, handle clamp which allows a welding safely.
Discover also :
Earthing system
ARGOSWELD electronic igniter
Protection systems
ACTIVE 4D® Early streamer emission
Protection systems
ACTIVE 2D® Early streamer emission
Protection systems
ACTIVE 1D® Early streamer emission
Protection systems
Franklin type simple lightning rods
Protection systems
Meshed cage
Protection systems
Tight Strand
Lightning counters and remote testers
ACTIVE 2D® Multitester pack
Lightning counters and remote testers
ACTIVE 2D® Remote Tester
Lightning counters and remote testers
ACTIVE 1D® Wire Test
Lightning counters and remote testers
Active 1D® and Active 2D® Perch test
Earthing system
Grounding
Lightning counters and remote testers
Lightning counters
Earthing system
Ground Improving Material
Earthing system