Protection systems
Franklin type simple lightning rods
“Franklin type” simple lightning rods (IEC/NF EN 62305-3)
Franklin lightning rods, which are tappered, have a perfectly slender and attractive point. In stainless steel, they have a standard length of 2.05 m and can be extended by the addition of treated steel or stainless steel elevation rods.
Available in 4m height, stainless steel elevation rod (AFA4001PF).
Available in 6m height, stainless steel elevation rod (AFA6001PF).
Available in 8m height, stainless steel elevation rod (AFA8001PF).
“Industrial chimney” model
This model only exists in stainless steel version. The points are bent to keep them out of fumes and corrosive vapors. They are generally used in quantities of two or more, depending on the diameter of the stack.
Radii of protection
Not applicable beyond values marked x.
Only the fictive sphere and mesh methods are applicable in this case.
h is the height of the device above the volume to be protected.
“a” is the hall-angle of the vertex of the cone of revolution, defining the radius of protection.
Protection levels I, Il, III, and IV are defined by the NF C 17-100 standard.
Discover also :
Protection systems
ACTIVE 1D® Early streamer emission
Protection systems
ACTIVE 2D® Early streamer emission
Protection systems
ACTIVE 4D® Early streamer emission
Lightning counters and remote testers
ACTIVE 1D® Wire Test
Lightning counters and remote testers
Active 1D® and Active 2D® Perch test
Lightning counters and remote testers
ACTIVE 2D® Remote Tester
Lightning counters and remote testers
ACTIVE 2D® Multitester pack
Masts supports and fixings
Lightning rods fixings
Protection systems
Meshed cage
Lightning counters and remote testers
Lightning counters
Protection systems
Tight Strand
Earthing system
Grounding
Earthing system
Exothermic welding
Earthing system
Ground Improving Material
Earthing system